Import ConfigScriptHotSpotRouterOS.rsc error
Topics about the wireless hardware

Rate this topic
   Post Reply
10 posts   •   Page 1 of 1
Mirkos
Posts: 22
Joined: 01 Oct 2015, 15:04

Import ConfigScriptHotSpotRouterOS.rsc error

by Mirkos » 26 Jul 2016, 11:53

I have this error when I try to upload ConfigScriptHotSpotRouterOS.rsc is there a way around this?
Haplite ver 6.34.6.PNG
You do not have the required permissions to view the files attached to this post.

HSNMSupport
Posts: 1553
Joined: 26 Jul 2016, 09:16

Re: Import ConfigScriptHotSpotRouterOS.rsc error

by HSNMSupport » 26 Jul 2016, 12:01

Hi Mirkos!
Probably you have not reset your Mikrotik before to import the configuration file, or probably your mikrotik has not enabled the hotspot package.
On Documentation menù of your HSNM there is a manual called SetupGateway.pdf that explain you how to configure your Mikrotik GW

Hope this helps you

Mirkos
Posts: 22
Joined: 01 Oct 2015, 15:04

Re: Import ConfigScriptHotSpotRouterOS.rsc error

by Mirkos » 26 Jul 2016, 12:02

I tried all....i reset to default upgraded firmware. made sure that on the appliance i have hAp selected but still it fails to load..I don`t know no could it be the CAPsMAN on the Mikrotik?

HSNMSupport
Posts: 1553
Joined: 26 Jul 2016, 09:16

Re: Import ConfigScriptHotSpotRouterOS.rsc error

by HSNMSupport » 26 Jul 2016, 12:08

Hi Reed!
No, could not be CAPsMan....
Please follow the steps on SetupGateway.pdf and you must be able to configure your gateway
AtlanteImage_661067710.Jpg

Also check to have hotspot package enabled on your Mikrotik.
If you want send us the .RSC file in order to check

Best regards
You do not have the required permissions to view the files attached to this post.

Mirkos
Posts: 22
Joined: 01 Oct 2015, 15:04

Re: Import ConfigScriptHotSpotRouterOS.rsc error

by Mirkos » 26 Jul 2016, 12:10

I could be doing something wrong but i m following your guidelines to the point i did on time
and it worked with no issue at all ..Or the config of the appliance I don't
know look at my rsc file attached here.

Code: Select all

# Vars: # AdminPassword (User request) # CommentAdminPassword (Derived from AdminPassword) # WebDomain (Derived from appliance system settings) # DomainName (User request) # DomainNameForURI (Derived from DomainName) # HotSpotName (User request) # HotSpotNameForURI (Derived from HotSpotName) # HotSpotDNSName (Derived from HotSpotName) Hot spot dns name derived from HotSpotName without alphanumeric chars + .hotspot (Ex. myhsnetwork.hotspot) # RadiusPassword (Derived from /etc/raddb/clients.conf secret) # RadiusTimeout (Derived from HsOptions) # SSID (User request) # WanInterface (Wan interface: ether1; wlan2) # WanInterfaceOrVLAN (Wan interface or vlan: ether1; wlan2; vlan) # CommentLAN (Derived from LanUseDHCP. Enable/Disable IP settings) # CommentLANDHCP (Derived from LanUseDHCP. Enable/Disable DHCP) # LanIPAddress (User request) # LanNetMask (User request) # LanNetwork (Derived from 192.168.1.10 and 255.255.255.0. Ex: 192.168.1.10=192.168.0.201 and 255.255.255.0=255.255.255.0 =192.168.0.0) # LanGatewayIP (User request) # CommentVLAN (Values: #; Null. If VLAN is disabled, set value = #) # VLANId (VLan ID) # HotSpotIPAddress (User request) # HotSpotNetMask (User request) # HotSpotNetwork (Derived from and . Ex: =10.10.10.1 and =255.255.255.0 =10.10.10.0) # HotSpotNetworkPrefix (Derived from . Ex: =255.255.255.0 0=24) # DNSIPAddress (User request) # ApplianceIP (Derived resolving appliance url) # UsersPoolFromIP (User request) # UsersPoolToIP (User request) # LogDisabled (User request. Values: yes; no. Enable syslog) # CommentWireless (User request. Disable wireless) # HotSpotInterface (Values: wlan1; ether2. If = "" set wlan1 else ether2) # CommentBridgeEth2 (Values: #; Null. If wireless is disabled Or wireless is enabled and Add Eth2 to hot spot bridge is enabled, set value = #) # WalledGardenApplianceURL (Appliance url for walled garden with *.domain.extension or IP address) # PPTPEnabled (User request. Enable VPN) # CommentPPTP (Derived from PPTPEnabled. Enable/Disable PPTP) # PPTPServer (User request. Server name PPTP) # PPTPServerIP (Derived from PPTPServer) # PPTPUserName (User request. UserName for PPTP) # PPTPPassword (User request. Password for PPTP) # CommentPPTPIfIP (Derived from PPTPServer or PPTPEnabled) # CommentStaticDNS (Derived from HotSpotInLan setting) # CommentStaticDNS0 (Derived from WebDomain and HotSpotInLan setting) # CommentStaticDNS1 (Derived from RoundRobin1 and HotSpotInLan settings) # CommentStaticDNS2 (Derived from RoundRobin2 and HotSpotInLan settings) # WebDomainWalledGarden (Derived from appliance system settings and port redirecting) # WalledGardenUpdateMins (User request. WalledGardenUpdateMins setting) # CommentWalledGardenIP (Enable or disable walled garden IP. Used only if a port is defined and <> 80) # TimeZone (Derived from appliance system settings) # NTPServer1 (Derived from appliance system settings) # NTPServer2 (Derived from appliance system settings) # CustomCommands (Custom commands) # CommentRoundRobin0 (Derived from WebDomain. If WebDomain is a domain is empty, if an IP address set #) # CommentRoundRobin1 (Derived from RoundRobinDomain1. If RoundRobinDomain1 Or RoundRobinIP1 is empty, set #) # CommentRoundRobin2 (Derived from RoundRobinDomain2. If RoundRobinDomain2 Or RoundRobinIP2 is empty, set #) # RoundRobinDomain1 (Derived from appliance system settings) # RoundRobinIP1 (Derived from appliance system settings) # RoundRobinDomain2 (Derived from appliance system settings) # RoundRobinIP2 (Derived from appliance system settings) # CountryCode (Derived from appliance system settings) # Country (Derived from appliance system settings) # delay 15s; /interface wireless set 0 antenna-gain=2 channel-width=20mhz country=italy \ default-authentication=yes default-client-tx-limit=0 default-forwarding=\ no disable-running-check=no disabled=no frequency=2452 \ frequency-mode=manual-txpower frequency-offset=0 hide-ssid=no \ max-station-count=2007 mode=ap-bridge mtu=1500 name=wlan1 \ radio-name="Hotspot" security-profile=default ssid="" \ tx-power-mode=default band=2ghz-b/g wireless-protocol=802.11 /interface bridge add name=hs-bridge /interface bridge port add interface=wlan1 bridge=hs-bridge #/interface bridge port add interface=ether2 bridge=hs-bridge #/interface vlan add vlan-id= name=vlan interface=ether1 #/interface pptp-client add connect-to=%PPTPServerIP% user=%PPTPUserName% password=%PPTPPassword% profile=default-encryption disabled=no /ip hotspot profile add dns-name="" hotspot-address= html-directory=hotspot http-proxy=\ 0.0.0.0:0 login-by=http-pap,https,http-chap name=hsprof1 nas-port-type=wireless-802.11 \ radius-accounting=yes radius-default-domain="" radius-interim-update=\ received radius-location-id="" radius-location-name="" radius-mac-format=\ XX:XX:XX:XX:XX:XX rate-limit="" smtp-server=0.0.0.0 split-user-domain=no \ use-radius=yes /ip pool add name=HotSpotIP ranges=- /ip dhcp-server add address-pool=HotSpotIP authoritative=after-2sec-delay bootp-support=\ static disabled=no interface=hs-bridge lease-time=1h name=HotSpotDHCP /ip hotspot add disabled=no address-pool=HotSpotIP idle-timeout=5m interface=hs-bridge keepalive-timeout=10s name=\ "Hotspot" profile=hsprof1 /ip hotspot user profile set default idle-timeout=none keepalive-timeout=none name=default shared-users=\ unlimited status-autorefresh=1m transparent-proxy=no /snmp set contact="" enabled=no engine-id="" location="" trap-version=1 /snmp community set public address=0.0.0.0/0 authentication-password="" \ authentication-protocol=MD5 encryption-password="" encryption-protocol=\ DES name=public read-access=yes security=none write-access=no /system logging action set memory memory-lines=100 memory-stop-on-full=no name=memory target=memory set disk disk-file-count=2 disk-file-name=log disk-lines-per-file=100 \ disk-stop-on-full=no name=disk target=disk set echo name=echo remember=yes target=echo set remote bsd-syslog=no name=remote remote=192.168.1.244 remote-port=1514 \ src-address=0.0.0.0 syslog-facility=daemon syslog-severity=auto target=\ remote /ip address add address= netmask= disabled=no interface=hs-bridge network= add address=192.168.1.10 netmask=255.255.255.0 disabled=no interface=ether1 network=192.168.1.0 #/ip dhcp-client #add default-route-distance=0 disabled=no interface=ether1 /ip dhcp-server config set store-leases-disk=5m /ip dhcp-server network add address=/0 comment="hotspot network" gateway= dns-server=8.8.8.8 /ip dns set allow-remote-requests=yes cache-max-ttl=1w cache-size=2048KiB \ max-udp-packet-size=512 servers=8.8.8.8 #/ip dns static ##add address=192.168.1.244 disabled=no name=192.168.1.244 ttl=1d comment="appliance" ##add address= disabled=no name= ttl=1d comment="appliance" ##add address= disabled=no name= ttl=1d comment="appliance" /ip firewall connection tracking set enabled=yes /ip firewall filter add action=passthrough chain=unused-hs-chain comment=\ "place hotspot rules here" disabled=yes /ip firewall mangle add action=log chain=forward disabled=yes log-prefix="Hotspot" protocol=tcp \ tcp-flags=!,ack add action=log chain=forward disabled=yes log-prefix="Hotspot" protocol=udp /ip firewall nat add action=passthrough chain=unused-hs-chain comment=\ "place hotspot rules here" disabled=yes add action=masquerade chain=srcnat comment="masquerade hotspot network" \ disabled=no src-address=/0 /ip firewall service-port set ftp disabled=no ports=21 set tftp disabled=no ports=69 set irc disabled=no ports=6667 set h323 disabled=no set sip disabled=no ports=5060,5061 sip-direct-media=yes set pptp disabled=no /ip hotspot service-port set ftp disabled=no ports=21 /ip hotspot walled-garden add action=allow disabled=no dst-host=*.paypal.com add action=allow disabled=no dst-host=*.paypalobjects.com add action=allow disabled=no dst-host=paypal.112.2O7.net add action=allow disabled=no dst-host=":^www\\.paypal\\.com\$" dst-port=443 add action=allow disabled=no dst-host=":^content\\.paypalobjects\\.com\$" dst-port=443 add action=allow disabled=no dst-host=*.mediaplex.com add action=allow disabled=no dst-host=*akamai* add dst-host=192.168.1.244 path=!/ action=allow disabled=no add dst-host=192.168.1.244 path=!/ action=allow disabled=no #add dst-host= path=!/ action=allow disabled=no #add dst-host= path=!/ action=allow disabled=no #add dst-host= path=!/ action=allow disabled=no #add dst-host= path=!/ action=allow disabled=no #/ip hotspot walled-garden ip #add action=accept disabled=no dst-host=192.168.1.244 protocol=tcp #add action=accept disabled=no dst-address=192.168.1.244 protocol=tcp /ip proxy set always-from-cache=no cache-administrator=webmaster cache-hit-dscp=4 \ cache-on-disk=no enabled=no max-cache-size=none max-client-connections=\ 600 max-fresh-time=3d max-server-connections=600 parent-proxy=0.0.0.0 \ parent-proxy-port=0 port=8080 serialize-connections=no src-address=\ 0.0.0.0 /ip route add disabled=no distance=1 dst-address=0.0.0.0/0 gateway=192.168.1.1 scope=30 \ target-scope=10 /ip service set telnet disabled=no port=23 set ftp disabled=no port=21 set www disabled=yes port=80 set ssh disabled=yes port=22 set www-ssl certificate=none disabled=yes port=443 set api disabled=yes port=8728 set winbox disabled=no port=8291 /radius add accounting-backup=no accounting-port=1813 address=192.168.1.244 \ authentication-port=1812 called-id="" disabled=no domain="" realm="" \ secret=paperino service=hotspot timeout=5000ms #add accounting-backup=no accounting-port=1813 address= \ # authentication-port=1812 called-id="" disabled=no domain="" realm="" \ # secret=paperino service=hotspot timeout=5000ms #add accounting-backup=no accounting-port=1813 address= \ # authentication-port=1812 called-id="" disabled=no domain="" realm="" \ # secret=paperino service=hotspot timeout=5000ms /radius incoming set accept=no port=3799 /system identity set name="Hotspot" /system logging add action=memory disabled=no prefix="Hotspot" topics=info,!firewall add action=remote disabled=no prefix="Hotspot" topics=hotspot add action=remote disabled=no prefix="Hotspot" topics=firewall /system clock set time-zone-name=Africa/Gaborone /system ntp client set enabled=yes primary-ntp=132.163.4.102 secondary-ntp=\ 173.255.246.13 /system scheduler add interval=10s name=dynIP on-event=ipResolve policy=\ ftp,reboot,read,write,policy,test,winbox,password,sniff,sensitive \ start-time=startup add disabled=no interval=1m name=ImportWalledGarden on-event=WalledGarden \ policy=\ ftp,reboot,read,write,policy,test,winbox,password,sniff,sensitive \ start-time=startup add disabled=no interval=15s name=PaypalResolve on-event=PaypalResolve policy=\ ftp,reboot,read,write,policy,test,winbox,password,sniff,sensitive \ start-time=startup add interval=5m name=DownloadHTMLPages on-event=DownloadHTMLPages policy=\ ftp,reboot,read,write,policy,test,winbox,password,sniff,sensitive,api \ start-time=startup add disabled=no interval=9m name=HotspotUpgConf on-event=HotspotUpgConf \ policy=\ ftp,reboot,read,write,policy,test,winbox,password,sniff,sensitive,api \ start-time=startup add disabled=yes interval=30s name=AddWiFiUsrMACToHSNM on-event=AddWiFiUsrMACToHSNM \ policy=\ ftp,reboot,read,write,policy,test,winbox,password,sniff,sensitive,api \ start-time=startup add disabled=no interval=1m name=TicketPrinterImport on-event=\ TicketPrinterImport policy=\ ftp,reboot,read,write,policy,test,password,sniff,sensitive start-time=\ startup ###### Admin Password #:log info "Creating admin password"; #/user set admin password="%AdminPassword%" ###### System note /system note set show-at-login=yes note="ANY ATTEMPT WILL BE REGARDED AS MALICIOUS IN INTENT AND WILL BE PURSURED ACCORDING TO THE LAW!" /system script # Vars: # CommentPPTPIfIP (Derived from PPTPServer or PPTPEnabled) # PPTPServer (User request. Server name PPTP) # CommentPPTPIfIP (Derived from PPTPServer or PPTPEnabled) # Path (Derived from gateway hardwate type settings) # DomainNameForURI (Derived from DomainName) # HotSpotNameForURI (Derived from HotSpotName) add name=ipResolve policy=\ ftp,reboot,read,write,policy,test,password,sniff,sensitive \ source="#:local SERVERPPTP [resolve %PPTPServer%]\r\ \n\r\ \n#:if ([/interface pptp-client get 0 connect-to] != \$SERVERPPTP) do={\r\ \n# /interface pptp-client set 0 connect-to=\$SERVERPPTP \r\ \n# :log info \"Updated ip server pptp: \$SERVERPPTP\"\r\ \n#}" add name=WalledGarden policy=\ ftp,reboot,read,write,policy,test,password,sniff,sensitive \ source=":local URL;\r\ \n:local continue true;\r\ \n\r\ \n:local content [/file get \"hotspot/roundrobindomains.txt\" contents];\r\ \n:local RoundRobinHost [:toarray \$content];\r\ \n:local NumRoundRobinHost;\r\ \n:local counter 0;\r\ \n\r\ \n:while (\$continue) do={\r\ \n :set URL [:pick \$RoundRobinHost \$counter];\r\ \n :do {\r\ \n :set continue false;\r\ \n :log info \"Check if is a right appliance or not...\";\r\ \n /tool fetch url=\"http://\$URL/functions/checkidentity.php\" ds\ t-path=\"hotspot/checkidentity.txt\" mode=http;\r\ \n :local checkidentity [/file get \"hotspot/checkidentity.txt\" c\ ontents];\r\ \n :if (\$checkidentity = \"yes\") do={\r\ \n :log info \"YES, is answering a right appliance so...\"\r\ \n :log info \"Download walled-garden from \$URL started\";\r\ \n /tool fetch url=\"http://\$URL/functions/walledgarden.php\\\?do\ main=Gaborone&hotspotname=Hotspot\" dst-path=\"w\ alled-garden.rsc\" mode=http;\r\ \n /tool fetch url=\"http://\$URL/functions/walledgardenpaypalip.php\\\?do\ main=Gaborone&hotspotname=Hotspot\" dst-path=\"w\ alled-garden-paypalip.rsc\" mode=http;\r\ \n :log info \"Download walled-garden finished, now starting impor\ t...\"; \r\ \n }\r\ \n } on-error={\r\ \n :log info \"\$URL doesn't respond\";\r\ \n :set continue true;\r\ \n }\r\ \n :set counter (\$counter + 1);\r\ \n :if ((\$counter=[:len \$RoundRobinHost]) || ([:len \$RoundRobinHos\ t]=0)) do={\r\ \n :set continue false;\r\ \n }\r\ \n}\r\ \nip hotspot walled-garden remove numbers=[/ip hotspot walled-garden find]\ ;\r\ \nimport file-name=walled-garden.rsc;\r\ \n:log info \"Import walled-garden finished\";" add name=PaypalResolve policy=\ ftp,reboot,read,write,policy,test,password,sniff,sensitive source=\ "import file-name=walled-garden-paypalip.rsc;" add name=DownloadHTMLPages policy=\ ftp,reboot,read,write,policy,test,password,sniff,sensitive \ source=":local URL;\r\ \n:local continue true;\r\ \n\r\ \n:local content [/file get \"hotspot/roundrobindomains.txt\" contents];\r\ \n:local RoundRobinHost [:toarray \$content];\r\ \n:local NumRoundRobinHost;\r\ \n:local counter 0;\r\ \n\r\ \n:while (\$continue) do={\r\ \n :set URL [:pick \$RoundRobinHost \$counter];\r\ \n :do {\r\ \n :set continue false;\r\ \n :log info \"Check if is a right appliance or not...\";\r\ \n /tool fetch url=\"http://\$URL/functions/checkidentity.php\" ds\ t-path=\"hotspot/checkidentity.txt\" mode=http;\r\ \n :local checkidentity [/file get \"hotspot/checkidentity.txt\" c\ ontents];\r\ \n :if (\$checkidentity = \"yes\") do={\r\ \n :log info \"YES, is answering a right appliance so...\"\r\ \n :log info \"Download file with round robin domains from \$URL s\ tarted\";\r\ \n /tool fetch url=\"http://\$URL/functions/getroundrobindomains.p\ hp\\\?domain=Gaborone&hotspotname=Hotspot\" \ dst-path=\"hotspot/roundrobindomains.txt\" mode=http;\r\ \n :log info \"Download file with round robin domains finished\";\ \r\ \n :local check [/file get \"hotspot/roundrobindomains.txt\" conte\ nts];\r\ \n :if ((\$check=\"\") || (\$check=\" \")) do={\r\ \n :log info \"The downloaded file roundrobindomains.txt is emp\ ty. Re-setting the old value into the file... \";\r\ \n /file set hotspot/roundrobindomains.txt contents=\"\$content\ \";\r\ \n } \r\ \n :log info \"Download HTML file from \$URL started\";\r\ \n /tool fetch url=\"http://\$URL/functions/gethotspotpages.php\\\ \?domain=Gaborone&hotspotname=Hotspot&page=login\" dst-path=\"hots\ pot/login.html\" mode=http;\r\ \n /tool fetch url=\"http://\$URL/functions/gethotspotpages.php\\\ \?domain=Gaborone&hotspotname=Hotspot&page=alogin\" dst-path=\"hots\ pot/alogin.html\" mode=http;\r\ \n /tool fetch url=\"http://\$URL/functions/gethotspotpages.php\\\ \?domain=Gaborone&hotspotname=Hotspot&page=radvert\" dst-path=\"ho\ tspot/radvert.html\" mode=http;\r\ \n /tool fetch url=\"http://\$URL/functions/gethotspotpages.php\\\ \?domain=Gaborone&hotspotname=Hotspot&page=statushtml\" dst-path=\"ho\ tspot/status.html\" mode=http;\r\ \n /tool fetch url=\"http://\$URL/functions/gethotspotpages.php\\\ \?domain=Gaborone&hotspotname=Hotspot&page=statusjs\" dst-path=\"ho\ tspot/appjs.js\" mode=http;\r\ \n /tool fetch url=\"http://\$URL/functions/gethotspotpages.php\\\ \?domain=Gaborone&hotspotname=Hotspot&page=statuscss\" dst-path=\"ho\ tspot/style.css\" mode=http;\r\ \n /tool fetch url=\"http://\$URL/functions/gethotspotpages.php\\\ \?domain=Gaborone&hotspotname=Hotspot&page=logouthtml\" dst-path=\"ho\ tspot/logout.htm\" mode=http;\r\ \n :log info \"Download HTML file finished...\";\r\ \n :log info \"Download Radius IP from \$URL started\";\r\ \n /tool fetch url=\"http://\$URL/functions/getradiusip.php\\\?dom\ ain=Gaborone&hotspotname=Hotspot\" dst-path=radiusip.rsc mode=http\ ;\r\ \n :log info \"Download Radius IP from \$URL finished\";\r\ \n }\r\ \n } on-error={\r\ \n :log info \"\$URL doesn't respond\";\r\ \n :set continue true;\r\ \n }\r\ \n :set counter (\$counter + 1);\r\ \n :if ((\$counter=[:len \$RoundRobinHost]) || ([:len \$RoundRobinHos\ t]=0)) do={\r\ \n :set continue false;\r\ \n }\r\ \n}\r\ \nimport file-name=radiusip.rsc;\r\ \n:log info \"Import radius finished\";" add name=HotspotUpgConf policy=\ ftp,reboot,read,write,policy,test,password,sniff,sensitive \ source=":local URL;\r\ \n:local continue true;\r\ \n:local content [/file get \"hotspot/roundrobindomains.txt\" contents];\r\ \n:local RoundRobinHost [:toarray \$content];\r\ \n:local counter 0;\r\ \n\r\ \n:while (\$continue) do={\r\ \n :set URL [:pick \$RoundRobinHost \$counter];\r\ \n :do {\r\ \n :set continue false;\r\ \n :log info \"Check if is a right appliance or not...\";\r\ \n /tool fetch url=\"http://\$URL/functions/checkidentity.php\" ds\ t-path=\"hotspot/checkidentity.txt\" mode=http;\r\ \n :local checkidentity [/file get \"hotspot/checkidentity.txt\" c\ ontents];\r\ \n :if (\$checkidentity = \"yes\") do={\r\ \n :log info \"YES, is answering a right appliance so...\"\r\ \n :log info \"Download file for check if hotspot is to reconfigur\ e or not...\";\r\ \n /tool fetch url=\"http://\$URL/functions/hotspotupdatable.php\\\ \?domain=Gaborone&hotspotname=Hotspot\" dst-path=\"hotspo\ t/updatable.txt\" mode=http;\r\ \n delay 2s;\r\ \n :local reconfigure [/file get \"hotspot/updatable.txt\" contents];\r\ \n :if (\$reconfigure = \"yes\") do={\r\ \n :log info \"Download new .rsc file for configure Hotspot...\ \";\r\ \n /tool fetch url=\"http://\$URL/functions/gethotspotconfigfiles.ph\ p\\\?domain=Gaborone&hotspotname=Hotspot&rsc\" \ dst-path=\"ConfigScriptHotSpotRouterOSNew.rsc\" mode=http;\r\ \n delay 2s;\r\ \n :log info \"Hotspot is resetted and reconfigured...\";\r\ \n /system reset-configuration no-default=yes run-after-reset=C\ onfigScriptHotSpotRouterOSNew.rsc\r\ \n }\r\ \n }\r\ \n } on-error={\r\ \n :log info \"\$URL doesn't respond\";\r\ \n :set continue true;\r\ \n }\r\ \n :set counter (\$counter + 1);\r\ \n :if ((\$counter=[:len \$RoundRobinHost]) || ([:len \$RoundRobinHos\ t]=0)) do={\r\ \n :set continue false;\r\ \n }\r\ \n}" add name=AddWiFiUsrMACToHSNM policy=\ ftp,reboot,read,write,policy,test,password,sniff,sensitive \ source=":local URL;\r\ \n:local continue true;\r\ \n:local content [/file get \"hotspot/roundrobindomains.txt\" contents];\r\ \n:local RoundRobinHost [:toarray \$content];\r\ \n:local counter 0;\r\ \n:local NumActiveHosts;\r\ \n:local MAC;\r\ \n\r\ \n:while (\$continue) do={\r\ \n :set URL [:pick \$RoundRobinHost \$counter];\r\ \n :do {\r\ \n :set continue false;\r\ \n :set NumActiveHosts [/ip hotspot host pri\ nt count-only];\r\ \n :local x 0;\r\ \n :if (\$NumActiveHosts != 0) do={\r\ \n :while (\$x < \$NumActiveHosts) do={\r\ \n /ip hotspot host print;\r\ \n :set MAC (\$MAC,[/ip hotspot host g\ et value-name=mac-address number=\$x]);\r\ \n# :log info \$MAC;\r\ \n :set x (\$x + 1);\r\ \n }\r\ \n /tool fetch url=\"http://\$URL/functions/wificonnection.php\\\?\ domain=Gaborone&hotspotname=Hotspot&mac=\$MAC\" mode=http\ ;\r\ \n }\r\ \n } on-error={\r\ \n :log info \"\$URL doesn't respond\";\r\ \n :set continue true;\r\ \n }\r\ \n :set counter (\$counter + 1);\r\ \n :if ((\$counter=[:len \$RoundRobinHost]) || ([:len \$RoundRobinHost]\ =0)) do={\r\ \n :set continue false;\r\ \n }\r\ \n}" add name=TicketPrinterImport policy=\ ftp,reboot,read,write,policy,test,password,sniff,sensitive source=":local \ URL;\r\ \n:local continue true;\r\ \n\r\ \n:local content [/file get \"hotspot/roundrobindomains.txt\" contents];\r\ \n:local RoundRobinHost [:toarray \$content];\r\ \n:local NumRoundRobinHost;\r\ \n:local counter 0;\r\ \n\r\ \n:local username;\r\ \n:local password;\r\ \n:local profile;\r\ \n\r\ \n:if (([/ip hotspot user find] != \"\") || ([/tool user-manager user fin\ d] != \"\")) do={ \r\ \n:while (\$continue) do={\r\ \n :set URL [:pick \$RoundRobinHost \$counter];\r\ \n :do {\r\ \n :set continue false;\r\ \n :log info \"Check if is a right appliance or not...\";\r\ \n /tool fetch url=\"http://\$URL/functions/checkidentity.php\" ds\ t-path=\"hotspot/checkidentity.txt\" mode=http;\r\ \n :local checkidentity [/file get \"hotspot/checkidentity.txt\" c\ ontents];\r\ \n :if (\$checkidentity = \"yes\") do={\r\ \n :log info \"YES, is answering a right appliance so...\"\r\ \n /tool fetch url=\"http://\$URL/functions/importmikrotikusersenab\ led.php\?domainname=Gaborone&hotspotname=Hotspot\" dst-path=\ \"hotspot/userexportenabled.txt\" mode=http;\r\ \n :local export [/file get \"hotspot/userexportenabled.txt\" conte\ nts];\r\ \n :if (\$export = \"1\") do={ \r\ \n :foreach i in [/ip hotspot user find] do={\r\ \n :set username [ip hotspot user get \$i name];\r\ \n :set password [ip hotspot user get \$i password];\r\ \n :set profile [ip hotspot user get \$i profile];\r\ \n /tool fetch url=\"http://\$URL/functions/importmikrotikuse\ rs.php\?domainname=Gaborone&profile=\$profile&username=\$username&passw\ ord=\$password\" mode=http;\r\ \n :log info \"Exported user \$username da HotSpot User\";\r\ \n /ip hotspot user remove \$i\r\ \n }\r\ \n :if ([/system package find name=user-manager disabled=no] = \"\ \") do={ \r\ \n :log info \"User Manager IS DISABLE OR NOT INSTALLED . Can\ not export users from User Manager\";\r\ \n } else={\r\ \n :foreach i in [/tool user-manager user find] do={\r\ \n :set username [/tool user-manager user get \$i username\ ];\r\ \n :set password [/tool user-manager user get \$i password\ ];\r\ \n :set profile [/tool user-manager user get \$i actual-pr\ ofile];\r\ \n /tool fetch url=\"http://\$URL/functions/importmikrotikuse\ rs.php\?domainname=Gaborone&profile=\$profile&username=\$username&passw\ ord=\$password\" mode=http;\r\ \n :log info \"Exported user \$username da User Manager\";\ \r\ \n /tool user-manager user remove \$i\r\ \n }\r\ \n }\r\ \n }\r\ \n }\r\ \n } on-error={\r\ \n :log info \"\$URL doesn't respond\";\r\ \n :set continue true;\r\ \n }\r\ \n :set counter (\$counter + 1);\r\ \n :if ((\$counter=[:len \$RoundRobinHost]) || ([:len \$RoundRobinHos\ t]=0)) do={\r\ \n :set continue false;\r\ \n }\r\ \n}\r\ \n}"

HSNMSupport
Posts: 1553
Joined: 26 Jul 2016, 09:16

Re: Import ConfigScriptHotSpotRouterOS.rsc error

by HSNMSupport » 26 Jul 2016, 12:13

Hi Mirkos,

I've seen your rsc file. There are many blank fields. For example you didn't set the SSID, the hotspot-address, the HotSpotIP ranges etc...

All these fields are fields that you have to set in the HSNM under the gateway configuration. So please edit the gateway configuration and set the fields under the "Fields to generate configuration script for the Mikrotik gateway" section. Then click on save, download the configuration files again, reset to no default your Mikrotik device and import the new generated script.

Anyway I suggest you to read the Administration Manual in order to have further informations about HSNM.

Hope to help you,

Best Regards.

Mirkos
Posts: 22
Joined: 01 Oct 2015, 15:04

Re: Import ConfigScriptHotSpotRouterOS.rsc error

by Mirkos » 26 Jul 2016, 12:13

Thanks for the time and dedicated support it really helped me a mile.....i got a small hiccup though but i guess im already there ..

i might be missing some config....Thanks and be patient with me once more..

Mirkos
Posts: 22
Joined: 01 Oct 2015, 15:04

Re: Import ConfigScriptHotSpotRouterOS.rsc error

by Mirkos » 26 Jul 2016, 12:15

Support..

I configured my mikrotik witth the below settings and i cant see it .....
Mikrotik settings.png

looks like the config is all wrong my appliance is at 192.168.1.244 but the router can not see ..looking at the config where did a mess it ......


Good morning..
You do not have the required permissions to view the files attached to this post.

Mirkos
Posts: 22
Joined: 01 Oct 2015, 15:04

Re: Import ConfigScriptHotSpotRouterOS.rsc error

by Mirkos » 26 Jul 2016, 12:15

Hi Reed
In your case problem is that you have configured the same network (192.168.1.0/24) on both the WAN and HOTSPOT interface!
You have to use a different network on HOTSPOT interface (for example 10.0.10.0/24), then download again the configuration file, reset your mikrotik and reconfigure it with the new configuration file downloaded.

Best regards

Alex
Hsnm Support
Hsnm Support
Posts: 50
Joined: 23 Sep 2015, 11:48

Re: Import ConfigScriptHotSpotRouterOS.rsc error

by Alex » 26 Jul 2016, 12:24

Hi
In your case problem is that you have configured the same network (192.168.1.0/24) on both the WAN and HOTSPOT interface!
You have to use a different network on HOTSPOT interface (for example 10.0.10.0/24), then download again the configuration file, reset your mikrotik and reconfigure it with the new configuration file downloaded.

Best regards :D

Rate this topic

Who is online

Users browsing this forum: No registered users and 10 guests