Cisco WLC configuration
Topics about the wireless hardware

Rate this topic
   Post Reply
7 posts   •   Page 1 of 1
Ghufran
Posts: 8
Joined: 31 May 2018, 15:35

Cisco WLC configuration

by Ghufran » 11 Apr 2019, 12:38

Hi Team,

I need a configuration for Cisco WLC. I have set the URL for redirection; but below is the behavior;
1- User gets the login page.
2- User get him self register.
3- Use gets password on SMS.
4- After entering Usr / Pwd, then user redirected to the login page.

HSNMSupport
Posts: 1529
Joined: 26 Jul 2016, 09:16

Re: Cisco WLC configuration

by HSNMSupport » 11 Apr 2019, 14:49

Hi Gufran
Generally this kind of issue happened if there is a radius communication problem between HSNM and CiscoWLC or if there was a radius authentication error.
Are you sure to have set the right radius secret on you CiscoWLC?
Are you sure to have the radius port opened on your firewall?

Have you ever read the SetupGuide (guide/SetupGuide/Cisco%20vWLC%20Setup%20Guide.en.pdf) for Cisco WLC ?

Best regards

Ghufran
Posts: 8
Joined: 31 May 2018, 15:35

Re: Cisco WLC configuration

by Ghufran » 16 Apr 2019, 13:08

Hi,

I am getting SSL error (attached for your reference). As per configuration guide in appendix "A", it is mentioned to add SSL certificate, could you please help how can download SSL from HSNM to the WLC.
You do not have the required permissions to view the files attached to this post.

Ghufran
Posts: 8
Joined: 31 May 2018, 15:35

Re: Cisco WLC configuration

by Ghufran » 16 Apr 2019, 14:07

Adding SSL certificate error.
You do not have the required permissions to view the files attached to this post.

HSNMSupport
Posts: 1529
Joined: 26 Jul 2016, 09:16

Re: Cisco WLC configuration

by HSNMSupport » 16 Apr 2019, 15:25

Hi Ghufran
It is not mandatory to use HTTPS so, first of all, I suggest you to try to get it working with HTTP. After that, if you want to have HTTPS you need to add an SSL certificate to HSNM and another SSL certificate to CiscoWLC.
on HSNM Administration manual you can find information on how to load an SSL certificate into HSNM.
At this URL, https://www.cisco.com/c/en/us/td/docs/w ... _cg80.html, is available Cisco documentations providing the steps to correctly configure the controller with an SSL certificate.

Best regards

Ghufran
Posts: 8
Joined: 31 May 2018, 15:35

Re: Cisco WLC configuration

by Ghufran » 16 Apr 2019, 15:28

Hi,
We have tested on HTTP & HTTPS both and getting same error on mobile captive portal.

Regards
Ghufran

HSNMSupport
Posts: 1529
Joined: 26 Jul 2016, 09:16

Re: Cisco WLC configuration

by HSNMSupport » 16 Apr 2019, 17:03

Hi Ghufran
With HTTP you cannot have the same issue....
If you had it probably you enabled the "HTTPS as default" checkbox on HSNM System Settings without loading a right certificate on it.
The SSL error is quit clear: the SSL certificate is not from a trusted CA

Best regards

Rate this topic

Who is online

Users browsing this forum: No registered users and 5 guests