We have configured HSNM as you have recommended. And we have also downloaded the configuration file from GW and uploaded to a Mikrotik 450G Router. Cisco AP connected to Eth3. And Uplink is connected with Eth2. After Importing .rsc file, we are seeing this error.
"Input Doesn't Martch any value of country"
However, after digging into the script we have found this;
Which indicated .rsc script is trying to open a SSID inside Mikrotik Wireless interface. But We are using an external Cisco AP here. Please let me know how to solve this issue./interface wireless
set 0 antenna-gain=2 \
default-authentication=yes default-client-tx-limit=0 default-forwarding=\
no disable-running-check=no disabled=no country="no_country_set"\
frequency-mode=superchannel frequency-offset=0 hide-ssid=no \
max-station-count=2007 mode=ap-bridge mtu=1500 name=wlan1 \
radio-name="MultiSSID" security-profile=default ssid="SSID-BASE" \
tx-power-mode=default wireless-protocol=802.11 vlan-id=3999 vlan-mode=no-tag
Thanks in Advance.