HSNM Forum

Hi,

We have configured HSNM as you have recommended. And we have also downloaded the configuration file from GW and uploaded to a Mikrotik 450G Router. Cisco AP connected to Eth3. And Uplink is connected with Eth2. After Importing .rsc file, we are seeing this error.

"Input Doesn't Martch any value of country"

However, after digging into the script we have found this;

/interface wireless
set 0 antenna-gain=2 \
default-authentication=yes default-client-tx-limit=0 default-forwarding=\
no disable-running-check=no disabled=no country="no_country_set"\
frequency-mode=superchannel frequency-offset=0 hide-ssid=no \
max-station-count=2007 mode=ap-bridge mtu=1500 name=wlan1 \
radio-name="MultiSSID" security-profile=default ssid="SSID-BASE" \
tx-power-mode=default wireless-protocol=802.11 vlan-id=3999 vlan-mode=no-tag

Which indicated .rsc script is trying to open a SSID inside Mikrotik Wireless interface. But We are using an external Cisco AP here. Please let me know how to solve this issue.

Thanks in Advance.

Try to disable Mikrotik Gateway Wifi as this:

Hi,

After uploading the configuration after disabling Mikrotik Gateway WiFi , it's now showing a different error.

Input does not match any value of master-interface

Beside, this error is also shown in all Virtual interface (VG1 - VG4) while saving configuration.



Thanks

Sorry, we can't provide more details.
You've to contact with our sales department.
Have a nice day.