Page 1 of 1

Default Mikrotik Hotspot Portal

Posted: 15 Mar 2020, 16:33
by samaviya
Hello Guys,
After system reset config and import I am getting the default MikroTik hotspot portal instead of HSNM portal. I got Mikrotik hEX lite RouterOS running 6.45.8

My test setup

Mikrotik
ether1 WAN
ether2 Hotspot LAN to TPLINK Wireless Access Point DHCP enabled for Wifi Clients and NAT


tried both config in HSNM for MikroTik

Re: Default Mikrotik Hotspot Portal

Posted: 16 Mar 2020, 11:03
by HSNMSupport
Hi,
have you chosen the right hardware type before exporting configs?
Do you have copied the right way to the hotspot folder?
Please follow the step-by-step guide regarding your hardware type.
Thank you

Re: Default Mikrotik Hotspot Portal

Posted: 16 Mar 2020, 14:04
by samaviya
Yes, I tried both settings doesn't work with both settings in the config for MikroTik.
hotspot folder I couldn't find but script creates a hotspot folder in a flash after import the config file downloaded from the HSNM portal.
Hi,
have you chosen the right hardware type before exporting configs?
Do you have copied the right way to the hotspot folder?
Please follow the step-by-step guide regarding your hardware type.
Thank you

Re: Default Mikrotik Hotspot Portal

Posted: 16 Mar 2020, 14:53
by HSNMSupport
Please re-try but before reset your MikroTik empty the mikrotik flash folder and re-charge your configs.
The ZIP file downloaded from HSNm contains an .RSC file plus the "hotspot" folder that you must copy inside the flash folder of your GW.
Please choose the right MikroTik. This kind of problem is related to a bad configuration imported into the gateway.
Have a nice day.

Re: Default Mikrotik Hotspot Portal

Posted: 16 Mar 2020, 16:29
by samaviya
It's working now. Its a problem with mac osx it doesn't show hotspot folder when unzipping the folder automatically.


Please re-try but before reset your MikroTik empty the mikrotik flash folder and re-charge your configs.
The ZIP file downloaded from HSNm contains an .RSC file plus the "hotspot" folder that you must copy inside the flash folder of your GW.
Please choose the right MikroTik. This kind of problem is related to a bad configuration imported into the gateway.
Have a nice day.

Re: Default Mikrotik Hotspot Portal

Posted: 16 Mar 2020, 16:53
by HSNMSupport
Really? Very strange...
anyway we are happy that now is owrking fine

Best regards