Page 1 of 1
No Access to HSNM
Posted: 23 Nov 2018, 10:02
by patrickk
Hi,
I woke up this morning not able to access HSNM. I have to restart the HSNM hardware before i could have access. i am not sure whether it is a hardware or software issue. I am using the latest firmware. I have reported similar issue earlier. please i need help urgently.
Re: No Access to HSNM
Posted: 23 Nov 2018, 10:24
by HSNMSupport
Hi patrickk,
I don't think it can have been a software problem. I think something happened at hardware level and that HSNM freezed.
Reason why it happened could be high temperature. I suggest you to check that HSNM has been installed in a well ventilated place.
Another thing you can do is to connect a monitor and a mouse to the HSNM and see if the mouse cursor can move. If it can't, surely the machine is freezed.
Best Regards.
Re: No Access to HSNM
Posted: 29 Nov 2018, 10:30
by patrickk
Hi patrickk,
I don't think it can have been a software problem. I think something happened at hardware level and that HSNM freezed.
Reason why it happened could be high temperature. I suggest you to check that HSNM has been installed in a well ventilated place.
Another thing you can do is to connect a monitor and a mouse to the HSNM and see if the mouse cursor can move. If it can't, surely the machine is freezed.
Best Regards.
Thanks,
I have checked the ventilation. I am monitoring. Will keep you informed.
Patrick
Re: No Access to HSNM
Posted: 03 Dec 2018, 10:41
by patrickk
Hi patrickk,
I don't think it can have been a software problem. I think something happened at hardware level and that HSNM freezed.
Reason why it happened could be high temperature. I suggest you to check that HSNM has been installed in a well ventilated place.
Another thing you can do is to connect a monitor and a mouse to the HSNM and see if the mouse cursor can move. If it can't, surely the machine is freezed.
Best Regards.
Thanks,
I have checked the ventilation. I am monitoring. Will keep you informed.
Patrick
Good morning,
My HSNM had to be restarted again on Saturday before it could be accessed. The room temperature is 26 degrees. can we probe further what the issue is?
Patrick
Re: No Access to HSNM
Posted: 04 Dec 2018, 08:34
by HSNMSupport
Hi Patrick
what you can do is:
1) Open the case of your HSNM
2) Check if the VGA cable is connected to the motherboard. If not, please connect it after power off HSNM
3) Power on HSNM again and connect a VGA monitor to HSNM
4) Connect an USB mouse and keyboard on HSNM
5) When HSNM stopo working again, check if you can move the mouse cursor and if you can type something with keyboard. If not, means that HSNM simply is freezed and so you have to open an RMA
Best regards
Re: No Access to HSNM
Posted: 04 Dec 2018, 10:56
by patrickk
Hi Patrick
what you can do is:
1) Open the case of your HSNM
2) Check if the VGA cable is connected to the motherboard. If not, please connect it after power off HSNM
3) Power on HSNM again and connect a VGA monitor to HSNM
4) Connect an USB mouse and keyboard on HSNM
5) When HSNM stopo working again, check if you can move the mouse cursor and if you can type something with keyboard. If not, means that HSNM simply is freezed and so you have to open an RMA
Best regards
Thanks,
will do that.
Re: No Access to HSNM
Posted: 06 Dec 2018, 15:33
by patrickk
Hi Patrick
what you can do is:
1) Open the case of your HSNM
2) Check if the VGA cable is connected to the motherboard. If not, please connect it after power off HSNM
3) Power on HSNM again and connect a VGA monitor to HSNM
4) Connect an USB mouse and keyboard on HSNM
5) When HSNM stopo working again, check if you can move the mouse cursor and if you can type something with keyboard. If not, means that HSNM simply is freezed and so you have to open an RMA
Best regards
Thanks,
will do that.
Hello,
I have attached a monitor and mouse as advised. Observing. thanks
Patrick