After some positive test this morning, I've tested several times this afternoon and notice that your Radius is not reachable:
radclient:
no response from server for ID 141 socket 3
Complete: 1 to 1 [%10.00]
Response: 1.#J ms (AVG) [Good:0 Bad:0 Timeout:1 Error:0]
Complete: 1 to 2 [%20.00]
Response: 6000.00 ms (AVG) [Good:0 Bad:0 Timeout:2 Error:0]
Complete: 2 to 3 [%30.00]
Response: 6000.00 ms (AVG) [Good:0 Bad:0 Timeout:3 Error:0]
Complete: 3 to 4 [%40.00]
Response: 6000.00 ms (AVG) [Good:0 Bad:0 Timeout:4 Error:0]
Complete: 4 to 5 [%50.00]
Response: 6000.00 ms (AVG) [Good:0 Bad:0 Timeout:5 Error:0]
Complete: 5 to 6 [%60.00]
Response: 6015.00 ms (AVG) [Good:0 Bad:0 Timeout:6 Error:0]
Complete: 6 to 7 [%70.00]
Response: 6000.00 ms (AVG) [Good:0 Bad:0 Timeout:7 Error:0]
Complete: 7 to 8 [%80.00]
Response: 6000.00 ms (AVG) [Good:0 Bad:0 Timeout:8 Error:0]
Complete: 8 to 9 [%90.00]
Response: 6000.00 ms (AVG) [Good:0 Bad:0 Timeout:9 Error:0]
Complete: 9 to 10 [%100.00]
Response: 6000.00 ms (AVG) [Good:0 Bad:0
Timeout:10 Error:0]
But locally everything works:
[root@seyhs ~]# radtest free@PalaciosDelArzobispo "" 127.0.0.1 0 RADIUSSECRET
Sending Access-Request of id 166 to 127.0.0.1 port 1812
User-Name = "free@PalaciosDelArzobispo"
User-Password = ""
NAS-IP-Address = 10.19.230.130
NAS-Port = 0
rad_recv:
Access-Accept packet from host 127.0.0.1 port 1812, id=166, length=38
Acct-Interim-Interval = 600
Session-Timeout = 3600
Idle-Timeout = 180
Even from an external Mikrotik GW:
Fotografia_dello_schermo_061920_021848_PM.jpg
Please verify your Fw rules.
Have a nice day.
You do not have the required permissions to view the files attached to this post.