HSNM Forum

This model of Mikrotik seems to have different names for the wifi interfaces.
Please try not to enable the wifi module inside the gw configuration:
Fotografia_dello_schermo_033123_034135_PM.jpg

Then reconfigure your gw from scratch.

Then add manually the wifi module to the Hotspot Bridge:

Fotografia_dello_schermo_033123_034225_PM.jpg

then set the wifi module with AP BRIDGE mode:

Fotografia_dello_schermo_033123_034246_PM.jpg


And turn it on.
Let us know.
S.T.

setup without SSID DISABLE OK

AFTER I HAVE ENABLE THE Wireless Tables

Capture d’écran 2023-03-31 à 15.39.34.png
and in interfaces wifi1 and wifi2 set SSID in configuration
Capture d’écran 2023-03-31 à 16.04.33.png

it's ok

won't the configuration be removed during a script update?

After testing the script update, the wifi configuration is disabled

Please reach us on Skype because we cannot understand what are you trying to do now.
Thank you.
S.T.

This model of Mikrotik seems to have different names for the wifi interfaces.
Please try not to enable the wifi module inside the gw configuration:
Fotografia_dello_schermo_033123_034135_PM.jpg

Then reconfigure your gw from scratch.

Then add manually the wifi module to the Hotspot Bridge:

Fotografia_dello_schermo_033123_034225_PM.jpg

then set the wifi module with AP BRIDGE mode:

Fotografia_dello_schermo_033123_034246_PM.jpg


And turn it on.
Let us know.
S.T.

setup without SSID DISABLE OK

AFTER I HAVE ENABLE THE Wireless Tables

Capture d’écran 2023-03-31 à 15.39.34.png
and in interfaces wifi1 and wifi2 set SSID in configuration
Capture d’écran 2023-03-31 à 16.04.33.png

After testing the script update, the wifi configuration is disabled

Here is what I configured to make it work
Wifi setup deactivate on gateway configuration Onn command Customized
i write this script

####### SETUP WIFI WAVE 2 on hAP Ax^2 without authentification ############
/interface/wifiwave2
set wifi1 disabled=no configuration.country=France configuration.ssid=*WiFi_Wave_64
/interface/wifiwave2
set wifi2 disabled=no configuration.country=France configuration.ssid=*WiFi_Wave_64
/interface bridge port add interface=wifi1 bridge=Guest-Bridge
/interface bridge port add interface=wifi2 bridge=Guest-Bridge
##### END SETUP WIFI WAVE2 ##########################################

if you have any improvements please correct me

share we will give you more

Hi,
this is correct since the new Mikrotik with AX interfaces calls the interfaces wifi1 instead wlan1 which was from the previous version of ROS/Mikrotik hardware.
We will ask our devs to include this new wifi interface nomenclature in an upcoming release.
G.